The Japan and the UK team will need to submit their applications by parallel submission, using the designated application form (Japan-UK Engineering Biology form (DOCX, 82.1KB)) to draft a joint proposal and submit it to the application websites of Japan Science and Technology Agency (JST) and Biotechnology and Biological Sciences Research Council (BBSRC).
The Japan-based project lead will need to submit a full application to JST using: Cross-Ministerial Research and Development Management System (e-Rad).
The UK project lead will be responsible for submitting a PDF copy of the application submitted to JST using the UK Research and Innovation (UKRI) Funding Service. The UK project lead will be required to incorporate additional information on budget breakdown and ethical considerations.
Project leads in UK and Japan should ensure that there are no differences in the content of the proposal submitted within the designated application form document (Japan-UK Engineering Biology form (DOCX, 82.1KB)).
UKRI’s Funding Service
We are running this funding opportunity on the new Funding Service. You cannot apply on the Joint Electronic Submissions (Je-S) system.
The project lead is responsible for completing the application process on the Funding Service, but we expect all team members and project partners to contribute to the application.
Only the lead research organisation can submit an application to UKRI.
To apply
Select ‘Start application’ near the beginning of this Funding finder page.
- Confirm you are the project lead.
- Sign in or create a Funding Service account. To create an account, select your organisation, verify your email address, and set a password. If your organisation is not listed, email support@funding-service.ukri.org
Please allow at least 10 working days for your organisation to be added to the Funding Service.
- Answer questions directly in the text boxes. You can save your answers and come back to complete them or work offline and return to copy and paste your answers. If we need you to upload a document, follow the upload instructions in the Funding Service. All questions and assessment criteria are listed in the How to apply section on this Funding finder page.
- Allow enough time to check your application in ‘read-only’ view before sending to your research office.
- Send the completed application to your research office for checking. They will return it to you if it needs editing.
- Your research office will submit the completed and checked application to UKRI.
Where indicated, you can also demonstrate elements of your responses in visual form if relevant. You should:
- use images sparingly and only to convey important information that cannot easily be put into words
- insert each new image onto a new line
- provide a descriptive legend for each image immediately underneath it (this counts towards your word limit)
- ensure files are smaller than 5MB and in JPEG, JPG, JPE, JFI, JIF, JFIF, PNG, GIF, BMP or WEBP format
Watch our research office webinars about the new Funding Service.
For more guidance on the Funding Service, see:
Deadline
We must receive your application by 16 April 2024 at 4:00pm UK time.
You will not be able to apply after this time.
Make sure you are aware of and follow any internal institutional deadlines.
Following the submission of your application to the funding opportunity, your application cannot be changed, and applications will not be returned for amendment. If your application does not follow the guidance, it may be rejected.
Personal data
Processing personal data
BBSRC, as part of UKRI, will need to collect some personal information to manage your Funding Service account and the registration of your funding applications.
We will handle personal data in line with UK data protection legislation and manage it securely. For more information, including how to exercise your rights, read our privacy notice.
Publication of outcomes
BBSRC, as part of UKRI, will publish the outcomes of this funding opportunity at Awarded research grants.
If your application is successful, we will publish some personal information on the UKRI Gateway to Research.
Summary
Word limit: 550
In plain English, provide a summary we can use to identify the most suitable experts to assess your application.
We may make this summary publicly available on external-facing websites, so make it suitable for a variety of readers, for example:
- opinion-formers
- policymakers
- the public
- the wider research community
Guidance for writing a summary
Clearly describe your proposed work in terms of:
- context
- the challenge the project addresses
- aims and objectives
- potential applications and benefits
Core team
List the key members of your team and assign them roles from the following:
- project lead (PL)
- project co-lead (UK) (PcL)
- researcher co-lead (RcL)
- specialist
- research and innovation associate
- technician
- visiting researcher
Only list one individual as project lead.
Find out more about UKRI’s core team roles in funding applications.
Japanese applicants
Please provide the following details of the Japanese applicants on this application:
- name
- institute
- job title
- role in project (for example, project lead or project co-lead)
- email address
Please also indicate who the lead Japanese applicants will be.
Please do not include details of Japanese applicants in the ‘Core team’ section.
Application questions
Ethics and responsible research and innovation (RRI)
Word limit: 500
What are the ethical or RRI implications and issues relating to the proposed work? If you do not think that the proposed work raises any ethical or RRI issues, explain why.
What the assessors are looking for in your response
Demonstrate that you have identified and evaluated:
- the relevant ethical or responsible research and innovation considerations
- how you will manage these considerations
You may demonstrate elements of your responses in visual form if relevant. Further details are provided in the service. Information provided here will be reviewed by UKRI and further information may be requested if the proposal is recommended for funding.
Genetic and biological risk
Word limit: 700
Does your proposed research involve any genetic or biological risk?
What the assessors are looking for in your response
In respect of animals, plants or microbes, are you proposing to:
- use genetic modification as an experimental tool, like studying gene function in a genetically modified organism
- release genetically modified organisms
- ultimately develop commercial and industrial genetically modified outcomes
If yes, provide the name of any required approving body and state if approval is already in place. If it is not, provide an indicative timeframe for obtaining the required approval.
Identify the organism or organisms as a plant, animal or microbe and specify the species and which of the three categories the research relates to.
Identify the genetic and biological risks resulting from the proposed research, their implications, and any mitigation you plan on taking. Assessors will want to know you have considered the risks and their implications to justify that any identified risks do not outweigh any benefits of the proposed research.
If this does not apply to your proposed work, you will be able to indicate this in the Funding Service.
Research involving the use of animals
Word limit: 10
Does your proposed research involve the use of vertebrate animals or other organisms covered by the Animals Scientific Procedures Act?
What the assessors are looking for in your response
If you are proposing research that requires using animals, download and complete the Animals Scientific Procedures Act template (DOCX, 74KB), which contains all the questions relating to research using vertebrate animals or other Animals (Scientific Procedures) Act 1986 regulated organisms.
Save it as a PDF. The Funding Service will provide document upload details when you apply. If this does not apply to your proposed work, you will be able to indicate this in the Funding Service.
If this section does not apply to you, please write ‘N/A’ and mark as complete.
Conducting research with animals overseas
Word limit: 700
Will any of the proposed animal research be conducted overseas?
What the assessors are looking for in your response
If you are proposing to conduct overseas research, it must be conducted in accordance with welfare standards consistent with those in the UK, as in Responsibility in the use of animals in bioscience research, page 14.
Ensure all named applicants in the UK and overseas are aware of this requirement. Provide a statement to confirm that:
- all named applicants are aware of the requirements and have agreed to abide by them
- this overseas research will be conducted in accordance with welfare standards consistent with the principles of UK legislation
- the expectation set out in Responsibility in the use of animals in bioscience research will be applied and maintained
- appropriate national and institutional approvals are in place
Overseas studies proposing to use non-human primates, cats, dogs, equines or pigs will be assessed during NC3Rs review of research applications. Provide the required information by completing the template from the question ‘Research involving the use of animals’.
For studies involving other species, select, download, and complete the relevant Word checklist or checklists from this list:
Save as a PDF. If you use more than one checklist, save it as a single PDF.
The Funding Service will provide document upload details when you apply. If this does not apply to your proposed work, you will be able to indicate this in the Funding Service.
If this section does not apply to you, please write ‘N/A’ and mark as complete.
Research involving human participation
Word limit: 700
Will the project involve the use of human subjects or their personal information?
What the assessors are looking for in your response
If you are proposing research that requires the involvement of human subjects, provide the name of any required approving body and whether approval is already in place.
Justify the number and the diversity of the participants involved, as well as any procedures.
Provide details of any areas of substantial or moderate severity of impact.
If this does not apply to your proposed work, you will be able to indicate this in the Funding Service.
If this section does not apply to you, please write ‘N/A’ and mark as complete.
Research involving human tissues or biological samples
Word limit: 700
Does your proposed research involve the use of human tissues, or biological samples?
What the assessors are looking for in your response
If you are proposing work that involves human tissues or biological samples, provide the name of any required approving body and whether approval is already in place.
Justify the use of human tissue or biological samples specifying the nature and quantity of the material to be used and its source.
If this does not apply to your proposed work, you will be able to indicate this in the Funding Service.
If this section does not apply to you, please write ‘N/A’ and mark as complete.
Resources and cost justification
Word limit: 700
What will you need to deliver your proposed work and how much will it cost?
What the assessors are looking for in your response
Justify the application’s more costly resources, in particular:
- project staff
- significant travel for field work or collaboration (but not regular travel between collaborating organisations or to conferences)
- any equipment that will cost more than £10,000
- any consumables beyond typical requirements, or that are required in exceptional quantities
- all facilities and infrastructure costs
- all resources that have been costed as ‘Exceptions’
Assessors are not looking for detailed costs or a line-by-line breakdown of all project resources. Overall, they want you to demonstrate how the resources you anticipate needing for your proposed work:
- are comprehensive, appropriate, and justified
- represent the optimal use of resources to achieve the intended outcomes
- maximise potential outcomes and impacts
This section should be used to discuss and justify UK costs only.
Please use the additional documentation for Japanese applicants.
Additional documentation: JST-BBSRC Joint Application
Word limit: 10
Please upload a single PDF attachment with the JST-BBSRC Joint Application Form as it will be submitted to JST’s Cross-Ministerial Research and Development Management System (e-Rad).
The Funding Service will provide document upload details when you apply.
Your organisation’s support
Word limit: 10
Provide details of support from your research organisation.
What the assessors are looking for in your response
Provide a Statement of Support from your UK research organisation detailing why the proposed work is needed. This should include details of any matched funding that will be provided to support the activity and any additional support that might add value to the work.
Upload guidance for the PDF will be provided in the Funding Service.
Letters of support from the Japanese research organisation are not required for this section.
BBSRC recognises that in some instances, this information may be provided by the Research Office, the Technology Transfer Office (TTO) or equivalent, or a combination of both.
You must also include the following details:
- a significant person’s name and their position, from the TTO or Research Office, or both
- office address or web link
Upload details are provided within the service on the actual application.
Project partners
Word limit: 500
Add details about any project partners’ contributions. If there are no project partners, you can indicate this on the Funding Service.
A project partner is a collaborating organisation who will have an integral role in the proposed research. This may include private sector, non-governmental organisations, third parties that would not normally receive funding directly from the grant and may provide direct (cash) or indirect (in-kind) contributions such as expertise, staff time or use of facilities.
Add the following project partner details:
- the organisation name and address (searchable via a drop-down list or enter the organisation’s details manually, as applicable)
- the project partner contact name and email address
- the type of contribution (direct or in-direct) and its monetary value
If a detail is entered incorrectly and you have saved the entry, remove the specific project partner record and re-add it with the correct information.
For audit purposes, UKRI requires formal collaboration agreements to be put in place if an award is made.
Project partners: letters (or emails) of support
Word limit: 10
Upload a single PDF containing the letters or emails of support from each partner you named in the ‘Project partners’ section.
What the assessors are looking for in your response
Enter the words ‘attachment supplied’ in the text box, or if you do not have any project partners enter ‘N/A’. Each letter or email you provide should:
- confirm the partner’s commitment to the project
- clearly explain the value, relevance, and possible benefits of the work to them
- describe any additional value that they bring to the project
Save letters or emails of support from each partner in a single PDF no bigger than 8MB. Unless specially requested, please do not include any sensitive personal data within the attachment.
For the file name, use the unique Funding Service number the system gives you when you create an application, followed by the words ‘Project partner’.
If the attachment does not meet these requirements, the application will be rejected.
The Funding Service will provide document upload details when you apply. If you do not have any project partners, you will be able to indicate this in the Funding Service.
Ensure you have prior agreement from project partners so that, if you are offered funding, they will support your project as indicated in the contributions template.
For audit purposes, UKRI requires formal collaboration agreements to be put in place if an award is made.
Do not provide letters of support from host and project co-leads’ research organisations.
Data management and sharing
Word limit: 1,000
How will you manage and share data collected or acquired through the proposed research?
What the assessors are looking for in your response
Provide a data management plan that clearly details how you will comply with UKRI’s published data sharing policy, which includes detailed guidance notes.
Facilities
Word limit: 750
Does your proposed research require the support and use of a facility?
What the assessors are looking for in your response
If you will need to use a facility, follow your proposed facility’s normal access request procedures. Ensure you have prior agreement so that if you are offered funding, they will support the use of their facility on your project.
For each requested facility you will need to provide the:
- name of facility, copied and pasted from the facility information list (DOCX, 35KB)
- proposed usage or costs, or costs per unit where indicated on the facility information list
- confirmation you have their agreement where required
If you will not need to use a facility, you will be able to indicate this in the Funding Service.
Please note this section should only be used to discuss facilities from the linked facility information list.
References
Word limit: 500
List the references you have used to support your application.
What the assessors are looking for in your response
Include all references in this section, not in the rest of the application questions.
You should not include any other information in this section.
We advise you not to include hyperlinks, as assessors are not obliged to access the information they lead to or consider it in their assessment of your application.
If linking to web resources, to maintain the information’s integrity, include persistent identifiers (such as digital object identifiers) where possible.
You must not include links to web resources to extend your application.
